S-Series 2″ x 6″ Herringbone Mesh

Porcelain

Description

Envision (by piece) The S-Series tile is a versatile collection with classic shapes and colors which are ideal for a variety of beautiful installations. The 2 × 12 ceramic tile and the Scallop (raised design) are for wall use only. All shapes and sizes of mesh mounted products can be installed on a wide variety of surfaces. The scallop has variation in color/glaze which is inherent and adds to the character of multi-dimensional tiles.

Piece to piece variation in shade or color are inherent in all fired clay products; therefore, it is recommended to mix tiles from several boxes at a time during installation to achieve the best range of color. Color may vary between sizes and shapes, therefore it is recommended to view current tile samples. When mixing sizes within a series, shade, texture and calibration differences should be expected. This series is suitable for residential and commercial applications. Because these products are all porcelain or ceramic, minimal maintenance is required.

Colors

Thickness

N/A

Size

2″ x 6″ (0.947 sf/sht)

Finish

Glossy

Shape

Herringbone

See the collection.

Testing

Breaking Strength C648	Chemical Resistance C650	Water Absorption C373	Frost Resistance C1026	Visible Abrasion Resistance C1027	DCOF
≥ 1300 N	Resistant	≤ 0.5%	Resistant	Resistant	DYNAMIC WET ≥ 0.42

DCOF rating is a measurement of a tile’s frictional resistance. It is the specifier’s responsibility to ensure the chosen tile is appropriate for each interior and exterior application.

DCOF applies to porcelain mesh mounts only, excludes wall tile 2 x 12 and Scallop.

Recommended Uses:

Commercial

Residential

*Interior Floor

Interior Wall

**Exterior Cladding

Fireplaces

Shower Walls

***Shower Floors

**Pool & Spa

*Excludes 2 x 12 & Scallop
**Excludes 2 x 12
***1″ Hex & Penny Round only