Reside USA 24″ x 48″
Rectified Color Body Porcelain, Digital Print Technology
Description
Envision (by sq. ft.) The Reside USA Series is a rectified color body porcelain. Inspired by the rich textures of commercial textiles, this series has a clean look and offers a simplistic, modern appeal. It is available in four neutral, on-trend colors and provides an industrial and commercial aesthetic that is available for residential installations as well. Because this material is a porcelain product, maintenance risks involved with actual stone are eliminated.
There will be noticeable variations in color and movement between pieces. Therefore, it is important and recommended that a range of this product be viewed before finalizing a purchase. This series is suitable for residential and commercial applications. When mixing sizes within a series, shade, texture, and calibration differences should be expected.
Colors
Thickness
N/A
Format
24″ x 48″
Finish
Matte
Shape
Rectangle
Additional Images
See the collection. (3″ x 12″ Surface Bullnose available)
Testing
| Breaking Strength C648 | Chemical Resistance C650 | Water Absorption C373 | Frost Resistance C1026 | Visible Abrasion Resistance C1027 | DCOF |
| ≥ 250 lb/ft² | Resistant | ≤ 0.5% | Resistant | Resistant | DYNAMIC WET ≥ 0.42 |
DCOF rating is a measurement of a tile’s frictional resistance. It is the specifier’s responsibility to ensure the chosen tile is appropriate for each interior and exterior application.
The above result is for the Standard Finish. The testing for R11 Anti-Slip Finish is static, which is different from the Dynamic Coefficient of Friction (DCOF) test which is a dynamic test. These two tests measure for different and separate results, therefore the DCOF test is not the appropriate test for the R11 Anti Slip finish. To be certified as R11 Anti-Slip Finish, a tile must pass internationally recognized testing.
P.E.I. RATING: 4
Recommended Uses:*
| Commercial | Residential | **Exterior Floors | Interior Wall | Exterior Cladding | Fireplaces | Shower Walls | ***Shower Floors | Pool & Spa |
*For proper bonding, LHT/LFT mortar for large format and heavy tiles should be used when installing tiles with a dimensional length greater than 15 inches and rectangular shape and plank tile, per industry standards. Proper thinset coverage is also necessary, and in some cases, back buttering of tile may be required.
*When installing rectangular/square tiles 15 inches or longer with a staggered joint, it is recommended that the offset should not exceed 33%, unless otherwise specified by the manufacture.
**24 x 48 R11 Anti-Slip Finish Only
***2 x 2 Mosaic Mesh, Straight Stack 1 x 12 Mesh and 24 x 48 R11 Anti-Slip Finish Only
